Keraflott Casting Compound white 25KG BAG

HobbyFun casting compound is a casting powder
that stands out due to its high quality and easy handling.

Lump-free, problem-free mixing.
Good flow properties - making it easy and clean to fill molds.
The white powder has a whiteness that ensures bright colors when painted.
Can be painted with watercolors immediately after demolding, and with any craft paint after drying.
Can be drilled and sanded, etc.

The good processing properties apply to both white and terracotta casting compounds.
The processing and hardening times are the same.

Mold release spray with PTFE 300ml

Mold release agent with PTFE is used to facilitate and support the demoulding of a rigid cast part from a rigid mould, e.g. when pouring gypsum casting compound into one-piece relief molds made of hard plastic, when pouring out concrete molds or when pouring wax into rigid candle molds.

DANGER

TFC mold release spray is not suitable for separating silicone from silicone when making multi-part silicone molds.
In this case, use TFC separating petroleum jelly or TFC separating wax.

Impression models, plastic, latex and silicone molds are made before molding or sprayed very thinly with TFC mold release spray. A micro-fine, invisible PTFE film is placed on the objects or mold walls, which prevents sticking and is light demoulding encourages.

processing

Shake can well before use.
Spray on evenly from a distance of 15 - 20 cm, making sure that not too much material is applied and excess material does not cause running marks.
Then let it dry for about 1-2 minutes.